How You Can Achieve A Perfect Looking Cut For Your Saw

Concreting is an important aspect that you need to really focus on when you are having some home renovation. It is essential that you get the high quality materials so that you can be assured that your concrete will last for long. On the other hand, you must ascertain that the right tools are being used by the construction workers so that you can evidently see a well looking concrete that is done with skill, patience and that of precision.

Keep in mind that a precisely cut concrete is what you should aim to have, you need to make sure that you hire someone with you, who will do the cut in such a way that the proper techniques and the use of the innovative power saw is being utilized. This is essential as you will only have one chance to cut the concrete and that you do not want to see your worker to actually fail in that one instance—consider that failure as costly.

Tips for a Perfect Concrete Saw Cut

Cutting concrete is a difficult task, which takes the utmost precision, patience and skill. The entire process is further confounded when you consider the fact that often you only have one opportunity at the cut unless you want to begin the entire process again. By practicing proper concrete cutting techniques and being up to date on the latest power saw technology, you are certain to get the best possible finish every time. Whether you are a professional tradesmen looking for a bit of a refresher or if you’re a DIY practitioner looking to begin their journey, we are here to provide tips to improve your concrete cutting abilities.

Choosing the Right Equipment

While it is still possible to use ancient techniques to cut concrete such as using a chisel and sledgehammer, we recommend that you use a specialised circular saw for the job. The current power saw range available to consumers today is quite astonishing and represents the forefront in industrial technology. We recommend looking in to purchasing a specifically designed concrete saw which are designed for heavy duty, professional construction work. Even if you are not a professional tradesperson, it is advisable to still have the equipment of the pros to get the results you desire.

At Vetner we stock two of the leading manufacturers of power cutters in the world. Stihl and Husqvarna are producers of the finest quality power saws and guarantee to produce sparkling finishes on your concrete surfaces every time. Our range is representative of the finest products available on the market today.

Diamond Blades

Diamond blades are essential to accompany your power saw when looking to cut through concrete. Diamond blades are designed to slice through the most rigid and dense surfaces possible, making light work of any concrete structure you are working on. To learn more about how you can perfectly cut your concrete, check this link.

On the other side of the coin, as a homeowner, you need to pay attention to the kind of concrete slab that you have at home. You need to consider the fact on how you can fully strengthen and make sure that your concrete slab is not going to look dilapidated. There are a lot of factors that you have to consider and that it is necessary that you are properly guided in ensuring that everything will go on based on the latest techniques and mechanisms in installing a concrete slab.

Concrete Slabs

Rainwater Drainage

It’s important to get rainwater away from the foundation as quickly as possible.  This prevents water from creating foundation problems.  If it runs under the slab, it can undermine the soil and stone supporting the slab.  Have you ever seen a concrete sidewalk with a crack in it that has settled?  The cracks let water through and over time, the water washes out the supporting soil or stone below the slab.  This causes the slab to fall as the support is removed from below.  So for your new concrete slabs, you want to prevent any movement that might cause structural issues.  Most building codes call for a minimum drop in grade of 6 inches for the first ten feet out from the foundation.  This helps get the water away from the home as quickly as possible.

Frost Protection

One of the other major reasons for filling in around a new slab is to protect the area below from freezing.  Being in Texas, freezing temperatures are probably a rare occurrence.  But if you do get some cold weather and the slab isn’t protected with soil around it, the freezing can take place very quickly.  And if the area under the slab freezes, it can swell and push up on the slab, causing structural problems.  So the soil surrounding the slab acts as an insulator to keep the area underneath warm.

Stone Support

Most slabs have a layer of stone placed below them to allow for drainage and support.  If there is no soil backfilled up and around the new concrete slabs, the stone may make its way out from around the edges of the slab.  If this happens, it can leave the slab unsupported around the perimeter.  This lack of support will lead to cracking and possible displacement of the slab over time, which can create structural problems for the structure. Please visit this site to gain substantial knowledge about concrete slabs: http://ift.tt/2mqG0u6.

Concreting works is an integral and essential aspect that you have to pay a closer attention to; it is something that you need to get your hands and mind into so that you can always have a perfect result in the end. You need to keep in mind that concreting works will allow you to have a good looking property that you can be proud to share to your friends and family. Further, it will allow you to get an upgraded value of your property for that matter.

The post How You Can Achieve A Perfect Looking Cut For Your Saw appeared first on ThermoConcrete.

Tips About Concreting Every Homeowners Should Know

When it comes to concreting, there are essential techniques and tips that every homeowners must know. There are actually innovations about concreting that has to be understood fully so that you can always be assured that the outcome can totally exceed the expectations that you have. These techniques are vital in ensuring that you get the right kind of works rendered to you, and that you can feel happy and contented with the concreting works being rendered. Following the listed tips below will make you feel more confident in undertaking that concreting renovation you have always dreamed of.

In the first place, each homeowner must understand that undergoing concreting works will not increase the aesthetic aspect of their property, but will substantially increase value of such property in the market. This means that the investment that you have placed for concreting is something that is not put to waste.

Laying a Concrete Slab

It is important to first select a good, reasonably level site for your slab.

Once you have chosen a site, clear the area and remove any grass.

Using pegs, roughly mark out the area and determine how much digging will be required. Now, dig out the area.

Visually establish high points and low points and use soil to level the area as best as possible.

Measure and construct the box away from where you plan to put the slab.

This gives you room to maneuver and work.

30 by 100 millimeter treated pine is ideal for the box frame.

In this case, the box dimensions are 3.1m by 3.1m, which allows for a 50 millimeter rebate.

Once you have dug the area out and made it as level as you can, place the box in the area.

The required thickness to your slab is 100 millimeter.

Using a spirit level, fill or dig out areas in order to ensure the box is level.

In this area, there is a slight slope in the land running into a far corner.

This makes the area around 180 millimeter; too low so we need to bring it up by even and fill remembering that how slab thickness is 100 millimeter.

Now that the boxing is in position, build up a level, drive pins into the corners, and sides to stop the box from moving. Paint pegs, or wooden stakes are ideal.

In some cases, you may need more than one peg on the side.

It is important to check the depth of the area you will be filling with concrete.

Place a straight edge tint before to cross the length and brink of the box.

Use a spirit level and check the depth of the area within the box.

Remember, it has to be 100 millimeter because that is the thickness of your slab.

Fill in areas too low and remove those areas too high.

Ensure that the fall of the slab follows the contour of the land.

Now that the area is level, lightly wet it down this will assist with compacting. The next step is to lay building plastic down and line the area.

Place reinforcing steel mesh on top of the plastic.

A light f52 gauge mesh all it is required.

This holds the concrete together and helps stop the concrete from cracking.

This particular slab will require 1 cubic meter of concrete and we are using a 20 MPA concrete mix, which basically means the stones or gravel use is 20 millimeter.

Pull the concrete in and level it up with shovels to the height of the boxing.

Screen the concrete off with aluminum screen or length of timber.

Oregon pine is light and inexpensive 70 x 30 millimeter, 4-5 meters long with person to reach in is ideal.

Simply work the concrete across as demonstrated.

Let the concrete go off or dry out a little for about half an hour, then complete rebate with an edging tool.

And finish off with a trial. Learn more information about concrete slab on this link.

Additionally, hiring an expert and reliable workers or a company for that matter will surely save you from so much headaches with respect to the kind of concrete slab that you must install. There are a lot of factors that you need to consider so that you can be assured of good results in the end. You need to really focus on the fact that certain matters will have to be fully checked and looked closely into so that you will be appreciative of what could be the end result.

Board Form Concrete – 10 Tips

Our company recently completed this amazing project with Alterstudio Architecture and the Board Form Concrete on the house we built is stunning!  Booth Concrete was my sub-contractor and with their help I compiled this list of 10 Tips!  The job site where we filmed is a remodel I refer to as our #DeTuscan project with FAB Architecture.  We are building several retaining walls on this sloped Lake Austin home with 2×8 vertical Board Forms and a beautiful cradle for the pool.  I hope these help with your next Architectural Concrete project! Check out this link to get more information on concrete slab: http://ift.tt/2l63fFj.

Concrete application is a herculean task. It is a must that you choose a company or a worker for that matter that will ensure that you can rely fully on the quality of services that they will render to you. Having a company that you can fully depend on will make you feel happy of the kind of outcome that you ought to receive at the end of the day.

The post Tips About Concreting Every Homeowners Should Know appeared first on ThermoConcrete.

Caring for Your Natural Stone

Natural stone is a common material in buildings that are used for interior purposes, exterior purposes, and finishing, so as you can see this is an important construction material. It is very important that this natural stone is very high quality when it is being used for construction because it is used for just about everything. You can find natural stone in chandeliers, vases, columns, tiles, windowsills, kitchens countertops, and also bathroom suites.

It is important that you can keep good care of your natural stone tiles.

Then using natural stone tiles, there will be some cement that is used in order to fix the tiles to the floor or to the walls. Do not use a knife to scratch the surface, but rather make sure you use a proper cement remover. And this will also help you remove things such as mold and lime masses as well, which is always a good thing and is a common problem for granite or marble surfaces.

Taking care of your floors

Granite or a marble floor can really make a home look like a palace and it is a great way for you to show cases the interior. However, you will still need to be able to maintain the floors if you want them to look good, and it is not too difficult just make sure you clean it every once in awhile.

Care for natural stone countertops

It is important to maintain your natural stone countertops because they will be exposed to citrus juice which has acid, fat, water, and a wide range of substances that could damage it easily. Also, since these countertops are always in contact with food, you will need to use products that are safe for food so you will not make yourself sick.

Polishing your natural stone

If you want your natural stone to look beautiful and glazed, then it is important to do some regular polishing. There is a wide selection of different kinds of polishing liquids out there that are natural as well as synthetic that can breathe some new life into your natural stone. You can use a polishing agent that is based on silicone which will not only polish your stone but it will also clean it as well. You can use this product for your wall tiles, floor tiles, windowsills, and also for the countertops as well. Natural stone is fairly maintenance free but if you want them to look good, it is important to regularly clean it.

The post Caring for Your Natural Stone appeared first on ThermoConcrete.